Title
Force-activated organocatalysts for plastic recycling

CoPED ID
f26bc7ed-81f6-485b-922f-7544ca0dbd5f

Status
Active

Funder

Value
No funds listed.

Start Date
Sept. 30, 2021

End Date
Sept. 29, 2025

Description

More Like This


Synthetic polymers are used in almost every aspect of modern life. For this reason, they also present an important environmental challenge. Although some polymers can be easily recycled (e.g.), required costly and/or challenging processes. This is especially true if the plastic is composed of mixed polymers and/or if the recovery of the monomer is targeted. This step could be facilitated if plastic where embedded with an additive that could accelerate their degradation at the end of their life. This goal could be achieved by implementing mechanoresponsive molecules, called mechanophores, that react upon application of a force to generate a useful chemical entity. For example, a force-activated catalyst could be used to facilitate depolymerisation. In this project we will produce new mechanocatalysts based on varied NHC-precursors, and investigate their mechanocatalytic properties in solution, using ultrasound and in the solid state. Ultimately, we aim to produce a mechanocatalyst able to increase the degradability/depolymerisation of challenging commodity polymer (e.g. PET, PU) in recycling/processing conditions such as : extrusion or batch hydrolysis/aminolysis.
Only a handful of mechanocatalysts have been reported but they are all metal-based, which make them expensive and difficult to process due to their low thermal and mechanical stability. The ideal mechanocatalyst is only activated when needed (and not for example during the production or the normal usage of the product). In other words, it must display a minimal sensitivity to a change in pH, temperature and humidity, but respond to a desired level of force. We have recently introduced a thermally-stable and environment-friendly alternative, based on a force-activated N-heterocyclic carbene (NHC) precursor (Nat. Chem. 2020, 12, 826; JACS 2021, 143, 3033).
Recent heterogeneous catalysis work in CEAS has demonstrated that a number of pure polyolefin feedstocks (polyethylene, polypropylene and polystyrene) and blends of these three can be successfully hydrocracked rapidly at much reduced temperatures yielding a predominantly C3 - C9 hydrocarbons (Ind. Eng. Chem. Res., 58 (45), 20601; EP Patent 2437886B1 -2019). Further work on the condensation polymer, polyethylene terephthalate (PET) using hydrolysis has led to conversions of 80% with around 80% selectivity to terephthalic acid at 220oC in 90 minutes. This project will extend this current work and will target the production of a mechanocatalyst able to increase the depolymerisation of challenging commodity polymer [e.g. PET, polyurethane (PUR)] in recycling/processing conditions such as, extrusion or batch hydrolysis/hydrocracking.
Objective 1: Catalyst design and optimisation of the mechanochemical and catalytic properties in solution
Objective 2: Exploration of the mechanochemical and catalytic properties in the solid state/melt
Objective 3: Investigation of various modes of activation in batch reactor (e.g. turbulent flow, vapor-induced elongational flow)
Objective 4: Optimisation of the mechanochemical and catalytic properties in hydrolysis/hydrocracking conditions for PET and PU.
With over 4.0 Mte of plastic waste being sent to landfill or incinerated annually in the UK (8 % is PET and a similar amount of PUR, PlasticsEurope, The Facts 2020), the development of integrated catalytic approaches for plastic recycling would allow us to make a significant and lasting contribution to this important area. The ability to control the lifecycle of polymers would have a dramatic impact on the flux of plastic waste (Nature 2016, 540, 363). Embedded molecular mechanisms act to prolong the life of high-performance polymers. The mechanocatalysts we propose to investigate could be used to implement self-degrading mechanisms in PET, PU, or polyamides to facilitate their degradation/depolymerisation at the end of their lifecycle.

Guillaume De Bo SUPER_PER
Weng Ieong STUDENT_PER

Subjects by relevance
  1. Polymers
  2. Plastic
  3. Catalysis
  4. Optimisation
  5. Ultrasound
  6. Polyethylene

Extracted key phrases
  1. Force
  2. Plastic recycling
  3. Synthetic polymer
  4. Commodity polymer
  5. Mixed polymer
  6. Performance polymer
  7. Condensation polymer
  8. Plastic waste
  9. Important environmental challenge
  10. Mechanocatalyst able
  11. Ideal mechanocatalyst
  12. New mechanocatalyst
  13. Catalytic property
  14. Modern life
  15. Batch hydrolysis

Related Pages

UKRI project entry

UK Project Locations