High Temperature, High Efficiency PV-Thermal Solar System

aaaeb971-8b24-451a-91cd-abb1c1794e16

Closed

EPSRC
EPSRC
EPSRC
EPSRC
EPSRC

£5,544,675

July 31, 2015

Jan. 31, 2019

Solar energy can be used to generate both heat and electrical power. Most solar panels are designed for only one of these purposes, so an electrical photovoltaic panel is typically no more than 20% efficient and will become hot when exposed to sunlight. If the panel is actively cooled by passing a fluid through the rear of the panel, it is possible to generate both heat and electrical power. This combined solar heat and power system is known as a hybrid Photovoltaic-Thermal (PV-T) collector and offers some advantages when space is at a premium and there is demand for both heat and power. By 2050 solar power is projected to deliver the majority of the world's electricity and will require much more efficient use of the premium, unshaded space that exists in the built environment. PV-T collectors are a highly efficient technology, capable of achieving system efficiencies (electrical + thermal) of over 70%.

In response to this medium term opportunity, this research proposal develops optical nanostructured surfaces that enable an industrially manufacturable solar cell to become the ideal PV-T absorber. This is achieved by ensuring visible and near-infrared sunlight light is scattered internally within the solar cell, longer wavelength sunlight is absorbed and very long wavelength thermal emission is suppressed. The research employs state of the art computer simulation to design the nanostructured surface, followed by large area nanofabrication that can be performed using low-cost effective nanoimprint methods (the technique used to manufacture DVDs). The the suppression of thermal radiation is achieved using a low-emissivity surface which is also a low-cost process, similar to the 'heat reflecting' coatings that are applied to low-E glass used in energy efficient windows.

The solar cell architecture employed is the Heterojunction Interface (HIT) solar cell pioneered by Sanyo and that recently set the world record for the highest efficiency silicon solar cell ever demonstrated. Remarkably, this solar cell can be manufactured at low cost and lends itself to structured coating owing to the unique heterojunction design. Importantly, this solar cell retains it's characteristically high electrical efficiency at high temperature making it ideal for PV-T applications.

Prototype PV-T collectors that contain this optimised solar cell will be fabricated in this project and subjected to both indoor and outdoor testing. A predictive computer model will be established that reproduces the electrical and thermal output of the collector under both indoor and outdoor conditions. The model will be used as a basis to assess the applicability of the technology in various applications, especially those that demand relatively high temperature heat (100 degC) for which the system will be particularly well suited.

The research will be disseminated in the scientific literature and conferences and also to a broader audience at workshops held at Imperial College and trade shows.

Potential Impact:
Improving the efficiency and operating temperature of a hybrid PV-T collector will accelerate the integration of solar technology in the built environment. This project delivers improvements in both electrical efficiency and collector temperature addressing a wider range of applications than conventional PV-T collectors.

The provision of electrical power is universally useful but cannot be easily stored, so one important impact PV-T system enables the electrical output to be switched to thermal generation at will. The applications therefore depend upon the temperature of the heat produced by the collector. Low to moderate heat output are well suited for use in commercial buildings, for example supermarkets, hotels and leisure centres and large residential buildings, for example social housing where district heating is used. The collector developed in this proposal is unique since it both delivers high electrical efficiency at high temperature, which opens up additional applications, specifically in the industrial sector in industries such as food processing, breweries, textiles, copper mining as well as thermal processing and absorption refrigeration.

The research therefore has impact at many levels of the solar technology supply chain. Firstly it significantly improves the performance of an innovative PV-T collector developed and patented by a British Company, Naked Energy. Secondly, it establishes a predictive computer modelling capability that enables rapid design and prototyping of PV-T systems by end users. Thirdly it marks the scientific milestone for the application of nanoscale optical structures into cost effective solar collectors.